Upgrades and additions to the ZYYX printers.
The ZYYX line of 3D printers are continuously being developed and improved. These upgrades are also available as upgrades for older ZYYX 3D printers.

Upgrades - 47 products

Showing 26–47 of 47 results

  • ZX500 ZYYX+ Filter box raiser (incl 10 mm screws)

    With this upgrade, you can use the improved OfficeSafe filters also in ZYYX Clas..

    €13,50 excl. VAT

  • ZX502 ZYYX/ZYYX+ Build-Plate

    ZYYX+ Build-Plate™ for ZYYX Classic and ZYYX+

    The ZYYX/ZYYX+ Build-Plate has a premium borosilicate glass base plate laminated..

    €59,50 excl. VAT

  • ZX503 ZYYX/ZYYX+ Build-Plate Classic

    Finally! The ZYYX Classic Build-plate is back! The surface material is similar ..

    €69,50 excl. VAT

  • ZX504 Hardened feeder gear complete

    Hardened feeder gear complete with set screw for ZYYX Pro. Used in ZYYX Pro sinc..

    €29,50 excl. VAT

  • ZX508 Perforated Build-Plate for ZYYX+

    ZYYX+ or ZYYX Classic build-plate optimized for har to print materials, like ABS..

    €89,50 excl. VAT

  • ZX510 ZYYX+ MagFlex Build-platform kit (complete with Multi sheet)

    MagFlex™ is ZYYX's new build-platform system whose base consists of a flat ..

    €165,00 excl. VAT

  • ZX511 ZYYX+ MagFlex Build-platform (platform only)

    The new ZYYX+ MagFlex™ Build-Platform has a premium borosilicate glass base pl..

    €117,50 excl. VAT

  • ZX512 ZYYX+ Teflon Tube

    Teflon Tube replacement for ZYYX+ and ZYYX Classic consisting of a premium 4/2.5..

    €14,00 excl. VAT

  • ZX601 ZYYX+ / ZYYX Classic Filament Monitor Kit (Monitor Only)

    Filament monitor spare part/upgrade kit (monitor only) for ZYYX+ and ZYYX Classi..

    €65,00 excl. VAT

  • ZX601+ ZYYX Classic Filament Monitor Addition Kit (Monitor+Cable Assembly)

    Filament Monitor Addition Kit for ZYYX Classic (Monitor+Cable Assembly). New imp..

    €75,00 excl. VAT

  • ZX606DIY ZYYX Connect™ (network port upgrade)

    Upgrade your ZYYX printer with the ZYYX Connect™ network module. This allows y..

    €295,00 excl. VAT

  • ZX607DIY ZYYX Connect™ Camera Add-on

    Upgrade your ZYYX Connect™ with the ZYYX Connect camera module. This allows yo..

    €90,00 excl. VAT

  • ZX608DIY ZYYX Connect+ (network port with camera upgrade)

    Upgrade your ZYYX printer with the ZYYX Connect network module with camera. This..

    €375,00 excl. VAT

  • ZX609DIY Trinamic TMS2209 stepper driver upgrade (xyz drivers + instruction)

    The stepper motors in a 3D printer are controlled by a stepper motor drive board..

    €129,00 excl. VAT

  • ZX609DIY4 Trinamic TMS2209 stepper driver upgrade (xyze drivers + instruction)

    The stepper motors in a 3D printer are controlled by a stepper motor drive board..

    €169,00 excl. VAT

  • ZX610 ZYYX Bondtech extruder upgrade for ZYYX+/Classic

    This is an upgrade for the ZYYX+ and ZYYX Classic extruder with optimised extrud..

    €295,00 excl. VAT

  • ZX611 ZYYX Bondtech extruder upgrade for ZYYX Pro with gear ratio

    This is an upgrade for the ZYYX Pro extruder with optimised extruder performance..

    €395,00 excl. VAT

  • ZX612 Upgraded internal filament support with ball bearings for ZYYX Pro

    Upgraded filament spool support for use inside the ZYYX Pro. This upgrade incorp..

    €39,00 excl. VAT

  • ZX615 Endstop switch board with clamp

    Endstop switch board (standard size) for all ZYYX 3D printers with reinforcement..

    €11,50 excl. VAT

  • ZX616 ZYYX Al Side Wagon Improved Belt Lock Kit

    This kit contains everything to replace the original side wagon belt tension fas..

    €17,50 excl. VAT

  • ZX618 External filament stand with ball bearings (for standard spools)

    Upgraded filament spool support for use outside the 3D printer. This improved st..

    €49,50 excl. VAT

  • ZX619 External filament stand with ball bearings (for large spools)

    Filament spool support for use outside the 3D printer. This larger stand incorpo..

    €64,50 excl. VAT
Shopping cart
Your cart is empty
Products: 0
Total: €0,00